Short Answer
- Hold the Power button for 30 seconds to soft reset the Harman Kardon Speaker.
- Use the respective button combinations according to the model to hard reset the Harmon Kardon Speaker.
Is your Harman Kardon speaker not functioning as expected, and not sure what to do next? A reset might be just what you need. Whether it’s Bluetooth connection failures, software errors, or unresponsive controls, resetting your speaker can often bring it back to optimal performance.
You have two possibilities: a soft reset and a hard reset to resolve the problem with your speaker. This guide will explain how to perform both soft and hard resets on your Harman Kardon speaker, ensuring it functions as it should.
How to Perform Soft Reset on Harman Kardon Speaker
Whether you are dealing with issues like connectivity, function, or audio, resetting your speaker can often bring it back to optimal performance. Foremost, start with a soft reset, a simple reboot that doesn’t delete any settings or paired devices, making it suitable for resolving minor issues.
1. Make sure your Harman Speaker is turned on.
2. Now, hold down the Power button for a few seconds and release the button once it turns off.
3. Stay for 30 seconds and press the Power button again to turn it on.
4. The soft reset is performed perfectly on your Harman Kardon, and check that the issue is resolved.
If the issues persist, proceed with factory/hard resetting your speaker.
How to Perform Hard Reset on Harman Kardon Speaker
If the problem is immense or cannot be solved by a soft reset, it is necessary to perform a hard reset, which can be a quick and effective solution. However, Harman Kardon has plenty of speaker models, and each varies in terms of performing reset. To make your job easier, we have outlined the reset process for all models below, just select your speaker and follow the instructions to reset it.
Quick Note! A hard reset, or factory reset, wipes all data and restores your speaker to its original settings.
Reset Harman Kardon Go+ Play 3, Onyx Studio Series, & Aura Studio Series Speakers
The procedure below applies to Go+ Play 3 speaker and Onyx Studio series 5, 6, 7, & 8. Also, Kardon Auro Studio 3 and 4 users can follow the same process to reset the speakers.
1. Turn on your speaker by pressing the Power button.
2. A white LED appears on the speaker that indicates it’s turned on.
FYI! If you can’t see any light, you need to charge the speaker using the provided cable.
3. After that, simultaneously press and hold the Volume Up and Bluetooth buttons for a short while (5-10 seconds).
4. Once the indicator turns Blue, release the button and ensure the reset is completed.
Reset Harman Kardon Neo Speaker
Harman Kardon Neo is a portable Bluetooth speaker with up to 10 hours of battery life. Check the steps below to reset the Neo speaker and bring it back.
1. Let’s start the reset by powering on the speaker.
2. Look for the physical buttons, which are commonly located on the right side of the speaker.
3. Now, hold down the Volume Up and Volume Down buttons until the LED turns Red.
4. Once it finishes, turn on your speaker and pair it with your preferred device.
Reset Harman Kardon Omni Speakers
Unlike other models, the Harman Kardon Omni 10+ and 20+ speakers have a built-in Reset button to factory reset the device.
1. Boot up the speaker and connect to your smart device.
2. Locate the Reset button, which is located at the bottom of the speaker.
3. Once you located it, press the button for up to 5-10 seconds until the indicator light turns off.
Tips! You can also release the button by checking the connection status on your phone or other devices.
4. After a few minutes, turn on your speaker and connect to the device.
Reset Harman Kardon Go Speakers
The following procedure is used to reset the Kardon Go + Play, Go + Mini, and more additional.
1. Press the Power button to switch the speaker so it will light up, and you will hear a chime.
2. Furthermore, long-press the Volume Up and Play buttons together.
3. When the indicator turns off release the button, it means your speaker has been successfully reset.
4. Leave it for a while, and turn it on, it will automatically go in a pairing mode then connect your device.
Reset Harman Kardon Citation Speakers
The Kardon Citation speakers come in numerous models like Citation One, 100, 300, & 500, Citation Bar, Surround Set, and MutliBeam 700. The reset process also varies depending on the model. Check the table that covers the steps for all those models.
Before proceeding, we need to turn on the speaker by quickly pressing the Power button.
| Speaker Model | Button Location | Procedure to Reset |
|---|---|---|
| Citation One, 100, 300, and 500 | The Reset button is located at the bottom of the speaker. | Hold the Reset button for 5 seconds. It automatically turns off after the reset. |
| Citation Bar | Use the Touch Panel at the top of the speaker. | Head to its Menu and choose Settings. Press and hold the Factory Reset option for 5-10 seconds. |
| Citation Surround Set, Citation Sub, and Citation MutliBeam 700 | Look for the Reset button on the backside of the speaker. | Once you locate it, press the Reset button for a few minutes until it turns off. |
Tips! Check your user manual if you are having trouble locating the reset button, as its position may vary slightly by model.
Once the reset is successful, turn on your speaker and reconnect it to your smart device. Make sure the speaker is properly reset and resolve the issue by playing any audio. If not, contact Harman Kardon customer service by visiting its official website for further assistance.
FAQ
Performing a factory reset on a Harman Kardon speaker can address several issues, including difficulties with Bluetooth pairing, software malfunctions, and controls that are not responding as they should.