Short Answer
- Perform a soft reset on the JBL soundbar by disconnecting the power cable, wait a few minutes, plug it back into the outlet, and turn on the soundbar.
- Hard reset of the JBL Soundbar varies according to the models.
- Additionally, you can also use your JBL ONE app on your smartphone to reset the specified models of the JBL soundbar.
- Hold down the Power button for 10 seconds to reset the WiFi settings on your JBL Soundbar.
If you encountering problems with your JBL soundbar, resetting the device can be a powerful solution for resolving issues and restoring its performance. This action can fix connectivity problems, address operational faults, and reset the soundbar to its default settings. Whether you’re troubleshooting persistent errors or preparing the soundbar as a new one, these steps will help you perform a successful reset and ensure the soundbar is set to deliver the best audio experience.
How to Soft Reset JBL Soundbar
Soft reset ensures that the soundbar is completely refreshed, which can enhance its functionality and overall performance.
- Press the Power button to turn off the soundbar.
- Unplug the power cable from the wall socket.
- Leave the soundbar unplugged for 1-2 minutes to ensure a complete reset.
- Plug the power cord back into the socket and turn the soundbar back on.
How to Factory Reset on JBL Soundbar
If a soft reset hasn’t resolved the issue with your JBL soundbar, a factory reset is necessary as a last resort. This process will return the soundbar to its default settings, potentially clearing any lingering problems and restoring proper functionality.
Notably, the hard reset process varies depending on the JBL soundbar model. Here are the outlined methods for each model. Select your JBL soundbar and follow the corresponding instructions to perform a reset.
Using Power and Source Buttons
This method is applicable for JBL BAR 9.1 and 5.1 Surround as well as the JBL Cinema SB Series, which includes the SB560, SB580, SB370, SB270, SB120, SB510, SB550, SB590, and SB190.
- Make sure your JBL surround is turned on.
- Long press the Power and Source buttons simultaneously for about 3 seconds.
- Release the buttons. The soundbar will reset to its default settings by removing any custom configurations or paired devices.
- The soundbar will reboot, and the rest will be finished, restoring it to its original factory configuration. After that, switch on your JBL bar.
Using Volume Buttons
Using these buttons, you can reset the JBL BAR 2.1, 3.1, and 5.1
- Ensure the connectivity and power on your soundbar.
- Now, hold the Volume Up and Volume Down buttons until the RESET text appears.
- Wait for a few minutes to reboot the device.
- Finally, turn on the soundbar and re-pair to your device.
Using Volume Buttons
This is the approach is advisable for resetting the JBL SB150.
- Detach the cord cable from the soundbar.
- Now, hold the Volume Up button, then reconnect the power cord to the soundbar.
- The color change of the LED from Green to solid Blue indicates the reset was successful.
- After that, turn on your JBL soundbar and pair it with your preferred device.
Using Volume and Virtual Surround Buttons
The below steps work for the JBL Cinema SB450 and SB400.
- Ensure your soundbar is turned on, and hold the Volume Up and Virtual Surround buttons for 10-15 seconds.
Note: If you own a JBL Cinema SB250, SB300, SB350, or JBL Cinema UB4100, hold down the Volume Down and Virtual Surround to reset the soundbar.
- Once the White light flashes, release the button and stay for a few minutes.
- Now, turn on your soundbar and begin to pair it.
Using Volume and Source Buttons
This key combination applies to reset the JLB BAR 300 and 500.
- Turn on your soundbar, then locate the Volume UP, Volume Down, and Source buttons.
Note: If you own a JBL Cinema SB110, hold down the Volume Up and Source to reset the soundbar.
- Now, press and hold the located buttons simultaneously for 5-10 seconds until you see the soundbar’s indicators change, such as lights flashing or the unit turning off.
- Once the reset indicator appears, release all the buttons.
- Hold for a while, and then turn it on again to complete the pairing process.
How to Reset JBL Soundbar Using LBL ONE App
You can use your smartphone to reset the JBL BAR 300 and 500 by following the below instructions.
- Get the JBL ONE app on your Smartphone from the Play Store or App Store.
- After the installation, launch the JBL ONE app and follow the on-screen instructions to complete the setup with the soundbar.
- Now, navigate to the Support section from the Settings tab.
- Search for Restore Factory Settings and select it. This resets the soundbar’s settings and unpairs the device automatically.
- After a while, turn on your soundbar and then pair it up again.
How to Reset WiFi Settings on JBL Soundbar
If your JBL soundbar is struggling with WiFi connectivity or facing network problems, checking and resetting the WiFi settings can usually fix the issue.
- Start by connecting to the electrical outlet and powering up your JBL soundbar.
- Now, press and hold the Power button for more than 10 seconds to initiate the reset.
- Notably, this process will erase all existing WiFi configurations, and you will need to set up the WiFi connection again from scratch.
FAQ
To troubleshoot your JBL soundbar, first, confirm it’s properly powered and connected to the correct input source. Check that the remote is working, and if necessary, perform a reset to resolve software glitches or connectivity issues, restoring it to its default settings.
Long press the Power and Input buttons simultaneously for 10 seconds. Then release the buttons when a sequence of white and orange lights blinks. This action will reset your soundbar and set it up from the beginning.