Short Answer
- Soft Reset Samsung Soundbar: Turn off the soundbar → Unplug it from the power source → Stay for 30-60 seconds → Plug in the cable → Turn on the soundbar → Run a test.
- Hard Reset Samsung Soundbar: Power on the soundbar → Press and hold the Power button → Release the button when INT appears → Wait for a few minutes to complete → Setup from the beginning.
- Alternatively, you can factory reset your Samsung Soundbar using the remote control functions.
Restoring your Samsung Soundbar to peak performance can be achieved through either a soft reset or a factory reset, depending on the issue you are facing. Primarily, a soft reset can often resolve minor glitches and temporary issues. However, if problems persist, a factory reset might be necessary. By choosing the appropriate reset method, you can ensure your soundbar operates smoothly and delivers high-quality audio as intended.
This article is designed to guide you through both reset options and bear your Samsung Soundbar to its optimal function.
Reasons to Reset the Samsung Soundbar
Resetting a Samsung Soundbar can address various concerns, and here are some key reasons:
- If your soundbar is struggling to connect with your TV, smartphone, or other devices, a reset can often fix connection issues.
- When you have adjusted the settings and end up being unhappy, or the soundbar isn’t operating correctly, resetting it can return it to its default configuration.
- Occasionally, software bugs or recent firmware updates can cause the soundbar to behave unexpectedly. A reset can typically resolve these types of issues.
- In cases where the soundbar isn’t responding to remote controls or manual inputs, a reset can often bring it back to working order.
- If your Samsung Soundbar is paired with multiple Bluetooth devices and you are encountering difficulties connecting a new device, a reset will remove all current connections, allowing you to pair from scratch.
How to Soft Reset the Samsung Soundbar
If you are having issues with your Samsung Soundbar, a simple soft reset might be the first step to resolve them. This method is straightforward and can often clear minor glitches. To do this,
- First, cut off the power supply by turning off the soundbar and unplugging it from the electrical outlet.
- Allow it to rest for a few minutes to ensure any residual power is completely drained.
- Next, reconnect the soundbar to the power source and power it back on.
- Once the soundbar is fully operational, test it to see if the problem has been resolved.
This basic reset can often fix issues like connectivity problems, audio glitches, or unresponsiveness.
How to Factory Reset the Samsung Soundbar
If performing a soft reset didn’t resolve your issues, you might need to consider a factory reset on your Samsung soundbar. This process involves reverting the soundbar to its original settings, effectively clearing any software bugs, and addressing more significant connectivity or performance problems.
There are three methods to perform a factory reset, each designed to help you restore the soundbar to its default state, ensuring optimal performance.
1. Using Power Button
This approach can be performed with or without the help of the soundbar’s remote.
- Press the Power button to turn off your soundbar.
- Long press the Power button on the remote control or on the soundbar for a few minutes.
- Release the button once your soundbar displays the INIT OK message on the panel.
- Leave the device to reset, then start to set up your soundbar from the beginning.
2. Using Physical Volume Buttons
Alternatively, you can reset the Samsung Soundbar without using the remote.
- Use the remote or press the Power button to switch on the soundbar.
- Locate the physical buttons, which are commonly located at the top-center of the soundbar.
- Hold down the Volume Up and Down buttons simultaneously for 5 seconds.
- A message INT will appear for 2 seconds on the display, and the device will turn off after displaying BYE.
3. Using Play/Pause Button
Moreover, you can use the soundbar’s remote control to reset the device seamlessly.
- Make sure your soundbar is turned off.
- Hold the Play/Pause button on the remote control for 10-15 seconds.
- Release the button once INT OK appears on the panel.
- After a few minutes, turn on the Samsung Soundbar and configure the device.
Note: You can also reset your Samsung Soundbar and Subwoofer. To do that, turn on the subwoofer → Press and hold the Sound Control button for 20-30 seconds → Check the soundbar’s display panel → Reconnect or pair the device.
FAQ
Unfortunately, there is no reset button on the Samsung Soundbar. Instead, you can use the other physical buttons to reset the soundbar.
Your soundbar may not work properly due to incorrect settings, outdated firmware, or connectivity issues. To fix this, adjust the settings, update the firmware, and ensure all connections are secure. If problems persist, try resetting the soundbar.